Irreversible Photochromic Material. A material can change color when expose to uv light and the color won’t change back.   PHOTOCHROMIC MATERIAL Change color with UVA radiation.  THERMOCHROMIC MATERIAL Change color with temperature.  FRAGRANCE MICROCAPSULE MATERIAL Long lasting microcapsules release fragrance longer than six months.  LONG LASTING GLOW IN THE DARK MATERIAL Store light and heat from conventional sources, and glow in the dark.  INVISIBLE FLUORESCENT MATERIAL It is white or invisible under conventional visible light and appears colorful fluorescence under UV/IR light.

1. Introduction

Invisible fluorescent materials absorb UV/IR and then emit colorful fluorescence almost instantaneously. Light energy gets released very fast in the process. Thus, when the UV/IR is dimmed or blocked, the materials stop emitting fluorescence immediately.

2. Product Description

A. Color Conversion:

From colorless to colored

Colorless (without UV/IR) Colored (with UV/IR)
B. Color:

Four colors available for organic dye (365nm). Five colors available for inorganic pigment (365nm). Four colors available for organic pigment (254nm). Two colors available for inorganic IR pigment.

a. 365nm

BL-LO-111 Blue
BL-LO-112 C.Green
BL-LO-113 Yellow
BL-LO-114 Red

b. 365nm

BL-LI-211 Blue
BL-LI-212 C.Green
BL-LI-213 Yellow
BL-LI-214 Purple
BL-LI-215 Red

c. 254nm

BL-SI-311 C.Green
BL-SI-321 Lemon
BL-SI-312 Yellow
BL-SI-322 Gold
BL-SI-323 Light Orange
BL-SI-313 Orange
BL-SI-314 Orange Red

d. 254nm/365nm

BL-BI-521
BL-BI-522
254nm Green
/
365nm Blue
254nm Y.Green
/
365nm Blue
BL-BI-523
BL-BI-524
254nm Pink
/
365nm Blue
254nm Yellow
/
365nm Red
BL-BI-525
BL-BI-526
254nm Orange
/
365nm Red
254nm Orange
/
365nm Yellow

e. IR

BL-IR-411 Blue
BL-IR-412 C.Green
BL-IR-421 Yellow
BL-IR-413 Red
BL-IR-422 White
BL-IR-423 Pink

f. 254nm/365nm/IR

BL-TI-621
BL-TI-621
254nm Pink
/
365nm Blue
/
IR Green
BL-TI-622
BL-TI-622
254nm Yellow
/
365nm Red
/
IR Green

3. Applications

A. Available Products & Applicability
B. Organic fluorescent powder (365nm)/ 254nm

a. Product Description

Average particle size of the organic fluorescent powder is 1-10µm, moisture content ≦ 3%.

b. Properties:

Organic fluorescent powder is dye, that is pervious to light completely while dissolves in suitable solvents. It glows well and needs low concentration for applications, suitable for ink/paint and plastic injection/extrusion.

c. Recommended Concentrations:

For solvent based ink/paint          0.1%~10% w/w
(For best results, about 5% concentration is required for 20µm film thickness)

For plastic injection/extrusion          0.01% ~0.5% w/w
(For best results, about 0.02% concentration is required for 0.2cm plastic thickness)

d. General Recommendations:

Use clear resin as base material. Usage concentrations are directly related to process and print thickness.

When applied to ink, organic fluorescent dye should be dissolved in suitable solvents first. Its solubility depends on the solvent formulations. Organic invisible fluorescent dye is suitable for screen printing、offset printing、gravure printing、flexo printing、pad printing、coating、and spray.

Applicable to PP 、 PE 、 PVC 、 PU 、 PS 、 ABS 、 TPR 、 EVA 、Nylon and acrylics. Processing temperature should not be over 240℃.

It is recommended to use masterbatch for plastic injection/extrusion to be dispersed well. Masterbatch should be completely dry prior to use. When using invisible fluorescent powder for plastic injection/extrusion, well mixing invisible fluorescent powder with lubricants and additives before the powder is added to plastic for best results.

C. Inorganic fluorescent powder (365nm/ IR)

a. Product Description:

The average particle size of inorganic fluorescent powder is 1-20µm, containing moisture ≦ 3%.

b. Properties:

The products are pigments with good light fastness and long durability, suitable for ink/paint and plastic injection/extrusion.

c. Recommended Concentrations:

For solvent/aqueous based ink/paint         2%~30% w/w
(For best results, about 25% concentration is required for 20µm film thickness)

For plastic injection/extrusion          0.1% ~5% w/w
(For best results, about 0.2% concentration is required for 0.2cm plastic thickness)

d. General Recommendations:

The products are insolvable in solvents. Applications of the products are limited by their particle size. Suitable applications are screen printing、coating、and spray, not applicable to gravure printing、pad printing、 offset printing and flexo printing.

Use clear resin as base material. Usage concentrations are directly related to process and print thickness.

Applicable to PP 、 PE 、 PVC 、 PU 、 PS 、 ABS 、 TPR 、 EVA 、Nylon、acrylics. Processing temperature should not be over 240℃.

It is recommended to use products in form of masterbatch for plastic injection/extrusion for well dispersal. Masterbatch should be completely dry prior to applications. When using invisible fluorescent powder for plastic injection/extrusion, well mixing the powder with lubricants and additives before it is added to plastic for best results.

4. Miscellaneous

A. The color of invisible fluorescence powder(365nm/254nm ) appearing upon exposure to ultraviolet (UV) radiation will be affected by other fluorescent materials, such as fluorescent dye and brightener. Do not apply the products with those materials or the base materials containing fluorescent substances. Use UV light to check all materials prior to applications to see if they contain any fluorescent substances.

B. Dissolubility table for organic fluorescent powder

5. Others

A. Storage: Keep sealed in a dark, cool place, away from direct sunlight. Best within two years if stored correctly.

B. Certifications: EN-71 & RoHS passed. Safe for food grade packing and toys.

Update version date:20190320

FOOTER AD